Hubcentric Bolt-On Wheel Spacers (Pair)
Sold in pairs (2 pieces). To get all 4 spacers, simply add 2 pairs to the cart.
Studded Configuration: The spacer is equipped with pre-installed high-tensile studs, allowing you to mount your wheels using wheel nuts.
Manufacturing time: 1 to 2 business days.
4x100
64.1
6061-T6 Duraluminium
Hubcentric Fitment
Bolts or Nuts
If your vehicle is equipped with factory bolts, please review these technical requirements:
Mounting Hardware Included: All necessary hardware to secure the spacers to your vehicle’s hub is included in the kit.
Protrusion Warning (<20mm): For spacers thinner than 20mm, the mounting bolts may protrude slightly beyond the face of the spacer. Please ensure your wheels have "pockets" (cavities) on the mounting face to accommodate this.
Wheel-to-Spacer Fitment: Depending on your specific configuration, you will secure your wheels to the spacers using either bolts or nuts.
Critical Bolt Length: If using bolts to fix the wheels to the spacers, it is imperative that they do not extend beyond the back of the spacer. Excess length will cause interference with the vehicle’s hub, preventing a flush fit and potentially causing structural damage.
Safety Check: Improper bolt length can lead to vibrations, improper seating, or hardware failure. Always verify a 100% flush fitment before torquing.
Critical Check: Wheel Bolt Protrusion
When using bolt-on spacers, the most important safety check is ensuring your wheel bolts do not "bottom out" against the vehicle’s hub.
The Rule: The length of the bolt extending through the wheel must be less than the thickness of the spacer.
Example: If you are installing 20mm spacers, your bolts must protrude less than 20mm from the back of the wheel.
Scenario A: If bolts extend 22mm, they will hit the hub, preventing a flush fit and causing potential damage.
Scenario B: If bolts extend 18mm, they will sit safely inside the spacer with no hub contact.
Solutions: If your bolts are too long, you must either shorten them, use a thicker spacer, or replace them with shorter bolts.
⚠️ The "Hand-Test" (Verify Before Fitting): > Before full installation, take one spacer and place it against the back of your wheel. Thread a bolt in by hand. If the bolt tip extends beyond the back face of the spacer, do not install. It will interfere with the hub.
If your vehicle is equipped with factory studs and nuts, please review these technical requirements:
Mounting Hardware Included: All necessary nuts to secure the spacers to your vehicle’s hub are included in the kit.
Nut Protrusion (<20mm): When using spacers thinner than 20mm, the mounting nuts may extend beyond the face of the spacer. Ensure your wheels are compatible with this protrusion.
Wheel-to-Spacer Fitment: You can mount your wheels onto the spacers using either bolts or nuts, depending on the specific Spacer Pro model selected.
Internal Clearance: If using bolts to secure the wheels to the spacer, ensure they do not protrude through the back of the unit. Any contact with the hub face will prevent the spacer from seating correctly.
Original Stud Clearance: In many cases (especially with 15mm or 20mm spacers), the vehicle’s original studs may stick out past the spacer face.
Option A: Your wheels must have internal "pockets" to allow for this clearance.
Option B: If no pockets are present and the studs touch the wheel, the original studs must be shortened (trimmed) or replaced with shorter versions to ensure a safe, flush fit.
Critical Check: Factory Stud Clearance
If your vehicle has factory studs (common on Ford, Toyota, Honda, etc.), they will likely protrude past the face of the spacer.
Wheel Pockets: Your wheels must have internal cavities (pockets) deep enough to accommodate the protruding factory studs.
Required Action: If your wheels do not have these pockets, the factory studs must be trimmed or replaced with shorter versions.
Safety Warning: Never install a wheel if it is resting on the studs instead of sitting 100% flush against the spacer face. This creates an extremely dangerous mechanical failure risk.
Please Read Carefully Before Placing Your Order
At Spacer Pro, we don't just pull parts off a shelf. Every unit is custom-manufactured to order based on your specific vehicle data and selected dimensions to ensure maximum precision.
Bespoke Production: Due to the personalized nature of our CNC-machining process, all orders are strictly non-returnable and non-refundable once production has commenced.
Your Responsibility: It is the customer's responsibility to verify all measurements, bolt lengths, and wheel pocket depths before ordering.
Expert Assistance: If you are unsure about any technical aspect of your fitment, please contact our technical support team before finalizing your purchase. We are here to ensure you get the perfect fit the first time.
Secure your investment by adding a high-security locking kit to your order. If selected, we will include a set of 4 locking bolts (or nuts) and a unique, custom-fit key designed to prevent wheel theft.
Precision Fit: No need to worry about measurements. We automatically supply the locks in the exact length required for your specific spacer thickness.
One Kit Per Vehicle: You only need to select this option once per order, even if you are buying multiple pairs of spacers for the front and rear axles.
Example of Mixed Fitment: If you add a pair of 20mm spacers and a pair of 16mm spacers to your cart, and select the locking option, you will receive:
2 Locking bolts sized for 20mm spacers.
2 Locking bolts sized for 16mm spacers.
1 Unique security key.
At Spacer Pro, every wheel spacer and adapter is engineered to exceed the most rigorous European safety and performance standards. Our commitment to precision manufacturing allows us to offer a comprehensive 3-year warranty, providing drivers with total confidence in every turn.
Premium Aerospace Materials: Precision-crafted from 6061-T6 Billet Aluminum. This high-grade alloy is selected for its exceptional strength-to-weight ratio, ensuring maximum durability without adding unnecessary unsprung mass.
High-Tensile Hardware: All kits are supplied with Grade 10.9 high-tensile steel bolts, engineered to withstand extreme torque and mechanical stress under high-performance driving conditions.
Ultra-Precision CNC Machining: Our components are machined to micron-level tolerances, ensuring a seamless, factory-perfect fit between the hub and the wheel.
Zero-Vibration Guarantee: Featuring a Dual Hub-Centric design, Spacer Pro units eliminate steering wheel wobble by ensuring the wheel remains perfectly centered, even at high autobahn speeds.
Direct Bolt-On Fit: Designed for a straightforward installation using your vehicle’s original mounting points—no modifications required.
Enhanced Dynamic Stability: Widening the track width improves the vehicle’s roll center and lateral stability, delivering sharper handling and increased cornering grip.
The Perfect Stance: Achieve the ultimate aesthetic upgrade. Spacer Pro delivers that aggressive, motorsport-inspired look by bringing your wheels perfectly flush with the fenders.